Heavy DutySFSP 112/40 Water-drop Hammer Mill
Industrial water-drop hammer mill for feed grinding. Unique grinding chamber design increases efficiency by 15%. Suitable for crushing corn, wheat, and sorghum.
- Model
- sfsp-112-40-hammer-mill
- capacity
- 6-9 T/H
- power
- 55-75 KW
- screen size
- 1.5mm - 3.0mm
- material
- Heavy Duty Carbon Steel
- rotor balance
- G6.3 Dynamic Balance
Premium Components Inside
We only use internationally recognized brands for critical components.
SKF
High-speed SKF bearings rated for continuous operation at 2,970 RPM with minimal heat generation.
Siemens
Premium efficiency Siemens motor with IP55 protection for dusty grinding environments.
/ Why Choose This Machine?
Engineered for continuous operation with maximum efficiency.
Suitable Raw Materials
Assembly & Machining Excellence
Rigorous manufacturing processes ensure reliable 24/7 continuous operation.
Dynamic Balancing
Every rotor assembly is balanced to G6.3 precision standard, eliminating vibration and extending bearing life significantly.
Wear-resistant Hammers
Hammers are made from high-chromium alloy steel with vacuum heat treatment, achieving HRC 60+ hardness for extended service life.
Precision Assembly
Each hammer mill is assembled with calibrated clearance between hammers and screen, ensuring consistent grinding fineness.
Frequently Asked Questions
What is the advantage of the water-drop chamber design in hammer mills? ▼
The water-drop chamber design breaks the circulation layer that forms in conventional chambers, allowing material to be ground a second time. This increases grinding efficiency by approximately 15% and produces more uniform particle size.
How often should hammer mill screens and hammers be replaced? ▼
Screen replacement depends on material abrasiveness, typically every 2-4 weeks. Hammers can be flipped and used on both sides, with total lifespan of 3-6 months. Always replace in matched sets to maintain rotor balance.
Recommended Spare Parts
为7×24小时运转而设计
每一台天佑颗粒机均采用世界顶级供应商的优质组件。从西门子电机到SKF轴承，我们绝不妥协品质——因为您的生产线承受不起停机。
西门子电机
⚡高效率IE3电机，低振动、稳定扭矩输出，适用于连续制粒。
SKF / NSK轴承
⚙️重型轴承，额定寿命50,000小时以上。最大限度减少维护间隔。
精密齿轮箱
🔧渗碳硬化斜齿轮，传动效率达98%。
调质器
🛡️不锈钢调质室，可调桨叶角度，实现最佳熟化效果。
我们的车间
制造基地
质量控制流程
- 来料检验: 每批原材料均进行硬度和成分检测。
- 过程检验: 机加工过程中每2小时验证CNC尺寸。
- 最终跳动测试: 出厂前进行动平衡和跳动检测。