⚙️ Technical Compatibility
- Hole Size: Custom to requirements
- Compression Ratio: Tailored to feed formula
CPM 3022 Heavy Duty Stainless Steel Ring Die
Massive Capacity Support: Engineered for the high horsepower of CPM 3022 mills, delivering maximum tonnage without structural failure.
Precision Fit: Perfectly machined clamping flanges ensure quick changes and zero vibration.
| material | X46Cr13 Stainless Steel |
| hole size | 2.0 - 8.0 mm (Customizable) |
| compression ratio | 1:6 - 1:12 |
| hardness | HRC 52-55 |
| feature | Extended Lifespan / Corrosion Resistant |
Guarantee
Quenched
Shipping
Why Choose Tianyou Spare Parts?
Precision manufacturing for ultimate pelleting performance.
CNC Gun Drilling
Imported 4-axis gun drilling center ensures ultra-smooth inner hole finish (Ra 0.8), reducing blockage and improving pellet quality for consistent feed output.
Vacuum Heat Treatment
Computer-controlled vacuum quenching achieves uniform HRC 52-56 hardness throughout the die body, preventing premature cracking under heavy pelleting loads.
Precision Counter-Sink
Multi-step counter-sinking and chamfering process creates a smooth entry cone for each hole, ensuring consistent feed flow and reduced energy consumption.
Premium Material & Extended Lifespan
Forged from high-grade X46Cr13 (Stainless Steel), our replacement ring dies and roller shells offer superior resistance against corrosion and abrasive wear during high-temperature pelleting. Processed through advanced vacuum heat treatment, we ensure a uniform hardness (typically HRC 52-56), which maximizes output capacity while minimizing the cost per ton of feed produced.
Frequently Asked Questions
Can this die handle 8mm cattle feed? ▼
Yes, for CPM 3022 models, we can gun-drill holes up to 8mm or 10mm with a custom compression ratio for large cattle cubes.
Is the die pre-run before shipping? ▼
While not fully run-in, all our holes are gun-drilled and polished, significantly reducing the break-in time required at your factory.
为什么材质至关重要
环模的使用寿命取决于其材料成分和热处理工艺。我们仅使用经过认证的X46Cr13不锈钢和20CrMnTi合金钢，通过真空热处理确保硬度均匀和最大耐磨性。
🐟 X46Cr13不锈钢
饲料环模材质
- • 硬度: HRC 52-56
- • 特点: 优异的耐腐蚀性，适用于水产饲料
- • 表面光洁度: 镜面抛光孔壁（Ra ≤ 0.8）
🪵 20CrMnTi合金钢
生物质环模材质
- • 硬度: HRC 55-62
- • 特点: 高冲击韧性，适用于木质纤维
- • 抗拉强度: ≥ 1080 MPa
孔壁光洁度
Ra 0.8
精密枪钻加工
硬度
HRC 52-62
真空热处理
精度
100%全检
最终质量检验
✓ OEM品牌兼容性
* Disclaimer: Tianyou Machinery is an independent manufacturer of premium aftermarket replacement parts. Any reference to original equipment manufacturer (OEM) brand names, trademarks, or machine models (such as CPM, Buhler, Muyang, Zhengchang, etc.) is strictly for the purpose of identifying compatibility. We are not affiliated with, sponsored by, or endorsed by these manufacturers.