⚙️ Technical Compatibility
- Hole Size: Custom to requirements
- Compression Ratio: Tailored to feed formula
Hardwood Pellet Die for CPM 7932 (6mm)
Wear Resistant Alloy: Made of high-grade 20CrMnTi alloy steel, specifically optimized for abrasive wood fibers and silica sand.
Deep Carburization: Carburizing heat treatment achieves HRC 58-62 surface hardness while maintaining a tough inner core to prevent cracking.
| material | 20CrMnTi Alloy Steel |
| hole size | 6.0 mm (Standard Wood) |
| compression ratio | 1:5 (Hardwood) |
| hardness | HRC 58-62 (Carburized) |
| feature | Extreme Wear Resistance |
Guarantee
Quenched
Shipping
Why Choose Tianyou Spare Parts?
Precision manufacturing for ultimate pelleting performance.
Deep Carburization
Advanced carburizing heat treatment achieves HRC 58-62 surface hardness while maintaining a tough inner core, providing extreme wear resistance against abrasive wood fibers.
CNC Gun Drilling
Precision gun-drilled holes with controlled geometry ensure consistent pellet density and maximum throughput for hardwood and softwood biomass pelleting.
Reinforced Blank Forging
High-pressure forged blanks eliminate internal metallurgical defects, preventing catastrophic die failure during high-pressure biomass compression.
Premium Material & Extended Lifespan
Forged from high-grade 20CrMnTi (Alloy Steel), our replacement ring dies and roller shells offer superior resistance against corrosion and abrasive wear during high-temperature pelleting. Processed through advanced vacuum heat treatment, we ensure a uniform hardness (typically HRC 52-56), which maximizes output capacity while minimizing the cost per ton of feed produced.
Frequently Asked Questions
Why use Alloy Steel (20CrMnTi) instead of Stainless Steel for wood pellets? ▼
Wood pelleting is highly abrasive but not corrosive. 20CrMnTi alloy steel allows for carburization, reaching HRC 58-62, which offers far superior wear resistance against wood fiber compared to stainless steel.
What is the lifespan of this CPM 7932 wood die? ▼
Depending on the wood species (hardwood vs softwood) and sand content, our premium alloy dies typically run for 1,500 to 2,000+ hours.
为什么材质至关重要
环模的使用寿命取决于其材料成分和热处理工艺。我们仅使用经过认证的X46Cr13不锈钢和20CrMnTi合金钢，通过真空热处理确保硬度均匀和最大耐磨性。
🐟 X46Cr13不锈钢
饲料环模材质
- • 硬度: HRC 52-56
- • 特点: 优异的耐腐蚀性，适用于水产饲料
- • 表面光洁度: 镜面抛光孔壁（Ra ≤ 0.8）
🪵 20CrMnTi合金钢
生物质环模材质
- • 硬度: HRC 55-62
- • 特点: 高冲击韧性，适用于木质纤维
- • 抗拉强度: ≥ 1080 MPa
孔壁光洁度
Ra 0.8
精密枪钻加工
硬度
HRC 52-62
真空热处理
精度
100%全检
最终质量检验
✓ OEM品牌兼容性
* Disclaimer: Tianyou Machinery is an independent manufacturer of premium aftermarket replacement parts. Any reference to original equipment manufacturer (OEM) brand names, trademarks, or machine models (such as CPM, Buhler, Muyang, Zhengchang, etc.) is strictly for the purpose of identifying compatibility. We are not affiliated with, sponsored by, or endorsed by these manufacturers.